B204

Transport Canada Approve HTC metal blades for Bell 204, 205 and UH-1

Transport Canada Approve HTC metal blades for Bell 204, 205 and UH-1

4-Aug-2020Source: Helicopter Technology Company

Helicopter Technology Company (HTC) is pleased to report that Transport Canada has formally accepted their STC for the 204P2100-103 Main Rotor Blade applicable on various Huey Models. STC # SR02492LA will be entered in the national index of STCs that have been reviewed and accepted by Transport Canada for installation on Canadian-registered aeronautical products. The... Read more

Bell 205, 205, 212, 214, 412 – FAA AD 2020-16-10 – Shoulder harness

Bell 205, 205, 212, 214, 412 – FAA AD 2020-16-10 – Shoulder harness

24-Jul-2020Source: FAA

The FAA is adopting a new airworthiness directive (AD) for certain Bell Textron Inc. (Bell) Model 204B, 205A, 205A-1, 205B, 212, 214B, 214B-1, 412, 412CF, and 412EP helicopters. This AD was prompted by a report of a shoulder harness seat belt comfort clip (comfort clip) interfering with the seat belt inertia reel. This AD requires... Read more

FAA certifies new Bell 204/205/UH-1 blades from HTC

FAA certifies new Bell 204/205/UH-1 blades from HTC

18-May-2020Source: Helicopter Technology Company

Helicopter Technology Company (HTC) is pleased to announce they are now offering an Upgraded Version of their Metal Main Rotor Blades for commercial Bell Helicopters 204B, 205A, and 205A-1 along with various UH-1 model restricted category helicopters.  The HTC Part Number 204P2100-103 Main Rotor Blade is a direct replacement the Bell Helicopter – Textron Part... Read more

Installation of Power and Control Box for external load operation at helicopter Bell 204/205

Installation of Power and Control Box for external load operation at helicopter Bell 204/205

1-Aug-2018Source: SPAES GmbH & Co. KG

SPAES GmbH & Co. KG installed with Wucher Helicopter a power and control box for use of long line load hooks and further systems for external load operation at helicopter Bell 204/205. The power and control box is mounted at the lower fuselage of the helicopter and supplies the external load cable with power to... Read more

HTC makes Metal Main Blades available for Bell 204, 205, UH-1

HTC makes Metal Main Blades available for Bell 204, 205, UH-1

25-Oct-2016Source: Helicopter Technology Company

Helicopter Technology Company (HTC) is pleased to announce they are now offering Metal Main Rotor Blades for commercial Bell Helicopters 204B, 205 & 205A-1 along with various UH-1 model restricted category helicopters.  The HTC Part Number 204P2100-101 Main Rotor Blade is a direct replacement the Bell Helicopter – Textron Part Number 204-011-250-113 Main Rotor Blade.... Read more

Canada approves Onboard Systems Non-Rotating Cargo Hooks for Bell 204, 205, 212, 412

Canada approves Onboard Systems Non-Rotating Cargo Hooks for Bell 204, 205, 212, 412

6-Mar-2016Source: Onboard Systems

Onboard Systems International, Inc., a leading provider of innovative helicopter cargo hook equipment, today announced that its non-rotating cargo hook kits for the Bell 204, 205, 212 & 412 aircraft have received certification from Transport Canada. Onboard received FAA certification for these cargo hook kits in December 2015; EASA certification for Europe is still pending.... Read more

FAA certifies Onboard Systems Non-Rotating hooks for Bell 204, 205, 212 and 412

FAA certifies Onboard Systems Non-Rotating hooks for Bell 204, 205, 212 and 412

7-Dec-2015Source: Onboard Systems

Onboard Systems International, Inc., a leading provider of innovative helicopter cargo hook equipment, today announced that its non-rotating cargo hook kits for the Bell 204, 205, 212 and 412 aircraft have been STC certified by the FAA. Onboard will also submit these systems to Transport Canada and EASA for certification in Canada and Europe, respectively.... Read more

Onboard Systems extends TBOs on medium Bell cargo hooks

Onboard Systems extends TBOs on medium Bell cargo hooks

11-Aug-2015Source: Onboard Systems

Onboard Systems International, Inc., a leading provider of innovative helicopter cargo hook equipment, today announced that it has extended the time between overhauls (TBO) for its TALON® MC Cargo Hook Kits for the Bell 204, 205, 212, 412 and UH-1 aircraft to six years or 1,500 hours, whichever comes first. Previously, the cargo hook kits... Read more

Sunset Aviation Service launches new website

Sunset Aviation Service launches new website

30-Apr-2015Source: Sunset Aviation Service

Sunset Aviation Service, Inc. located in Aurora Oregon is proud to announce our new website at www.sunsetaviationservice.com along with a new phone number of 503-776-5053. Our capabilities list has also been expanded to better serve more of the helicopter industry. Sunset Aviation Service was awarded the U.S. Department of Transportation, Federal Aviation Administration’s (FAA) certificate... Read more

Airwolf Aerospace receives FAA STC for Bell 204, 205, 212, UH-1 and AH-1 TT Straps

Airwolf Aerospace receives FAA STC for Bell 204, 205, 212, UH-1 and AH-1 TT Straps

5-Jan-2015Source: Airwolf Aerospace

Airwolf Aerospace the value leader in life limited aftermarket helicopter components is pleased to announce that it has received FAA STC SR03408CH for its TT straps for Bell 204, 205, 212, UH-1 and AH-1 Helicopters. Airwolf’s AA-204-310-101-101 and AA-204-310-101-103 TT Straps are in stock for immediate shipment. Senior Engineer, John Montana said, “we were able... Read more

EASA approves Onboard Systems Bell 204-412 Cargo Hook Retention System

EASA approves Onboard Systems Bell 204-412 Cargo Hook Retention System

23-Feb-2014Source: Onboard Systems

This Cargo Hook Retention System is designed for Bell 204, 205, 212 and 412 operators looking to keep the cargo hook assembly from rotating during certain types of external load missions. This certified upgrade kit provides a restraining arm that is coupled to the cargo hook assembly and supported by a bracket that is attached to... Read more

Canada approves Latitude Flight Data Monitoring on Bell 204, 205, 212, 214, and 412

Canada approves Latitude Flight Data Monitoring on Bell 204, 205, 212, 214, and 412

9-Jul-2013Source: Latitude Technologies

Latitude Technologies continues to push forward expanding the company’s portfolio of IONode™ Flight Data Monitoring (FDM) system STCs, announcing the addition of a Transport Canada STC for the IONode ION100 advanced data acquisition unit for Bell medium helicopters including the Bell 204, 205, 212, 214, and 412 model types.  This is the first IONode standalone... Read more

Dart announces skidtube step for medium Bells

Dart announces skidtube step for medium Bells

11-Jun-2013Source: DART Aerospace

DART Aerospace is pleased to announce the launch of a skidtube step that provides a flat non-slip surface to stand on, increasing security for hoist operator or spotters for the Bell Medium aircraft.  The step received approval from Transport Canada, FAA, EASA, and Japan. The Skidtube Step installs on the DART Round-I-Beam™ Skidtubes and installs... Read more

Cadorath announces 178 new Bell extended repairs

Cadorath announces 178 new Bell extended repairs

20-Feb-2013Source: Cadorath Aerospace

Cadorath Aerospace announcedit’s development of 178 new Bell Helicopter repairs in 2012. The Cadorath Aerospace design and engineering department continues to develop approved repairs for the Bell Helicopter line numbering close to a total of 900 repairs now available. Cadorath Aerospace completed a long list of new extended repairs throughout 2012 on the Bell Helicopter... Read more

Brazil certifies BLR Aerospace’s FastFin on B204, 205 and 212

Brazil certifies BLR Aerospace’s FastFin on B204, 205 and 212

15-Aug-2012Source: BLR Aerospace

 The Brazilian National Civil Aviation Agency (ANAC) has certified the FastFin® Tail Rotor Enhancement and Stability System for installation and flight on Bell 204, 205 and 212 helicopters. ANAC certification for BLR’s Bell 412 FastFin system is forthcoming. Brazilian operators of these Bell medium helicopters may now join their worldwide counterparts in realizing significant performance... Read more

Cadorath Aerospace develops 15 new Bell repairs April 2012

Cadorath Aerospace develops 15 new Bell repairs April 2012

6-May-2012Source: Cadorath Aerospace

Cadorath Aerospace announces it’s development of 15 new Bell Helicopter repairs in April 2012. The Cadorath design and engineering department continues to develop approved repairs for the Bell Helicopter line nearing close to a total of 800 repairs now available. Cadorath Aerospace recently engineered repairs on the Bell Helicopter’s 204B, 205A-1, and 212 rework lines... Read more

FAA proposes AD for main rotor yoke on Bell 204/205/212

FAA proposes AD for main rotor yoke on Bell 204/205/212

4-Nov-2011Source: FAA

DEPARTMENT OF TRANSPORTATION Federal Aviation Administration 14 CFR Part 39 [Docket No. FAA-2011-1188; Directorate Identifier 2008-SW-46-AD] RIN 2120-AA64 Airworthiness Directives; Bell Helicopter Textron, Inc. (Bell) Model 204B, 205A, 205A-1, 205B, and 212 Helicopters Preamble Information AGENCY: Federal Aviation Administration, DOT. ACTION: Notice of proposed rulemaking (NPRM). ———————————————————————– SUMMARY: This document proposes superseding four existing airworthiness... Read more

FAA AD 2010-26-52 – Bell 204/205/210/212/412

FAA AD 2010-26-52 – Bell 204/205/210/212/412

31-Oct-2011Source: FAA

Tail rotor blades... Read more

Dart announces TC/FAA/EASA approval of their Vertical Reference Door Kit

Dart announces TC/FAA/EASA approval of their Vertical Reference Door Kit

3-Aug-2011Source: DART Helicopter Services

DART is pleased to announce that they have received Transport Canada, FAA and EASA certification for their Vertical Reference Door Kit for Bell 204/205/210/212//214/412 model of aircraft. DART’s Vertical Reference Door improves visibility and allows the pilot to maneuver with precision when conducting any sort of vertical reference work.  In addition to offering a complete... Read more

21-May-11 OB-1891-P Bell 204B Cusco, Peru

21-May-11 OB-1891-P Bell 204B Cusco, Peru

21-May-2011

Crashed beside the runway at Cusco Airport on a post-maintenance test flight. Operator reports it as mechanical failure. On board were Jose Sanchez Caballero (pilot), Neffry Palomino and Daniel Delgado (mechanics).... Read more

FAA approves Dart LED Pulse Lights for Bell 204/205/210/212/214/412

FAA approves Dart LED Pulse Lights for Bell 204/205/210/212/214/412

26-Apr-2011Source: DART Helicopter Services

DART is pleased to announce that they have received FAA certification for their Cargo Mirror mounted LED Pulse Lights for Bell 204/205/210/212/214/412 model of aircraft. Transport Canada and EASA approvals have been previously received. DART LED Pulse Lights install easily on any DART Dual Cargo Mirror and provide excellent forward conspicuity for all Medium Bell... Read more

Dart wins TC and EASA approval for LED pulse lights for Bell 412/etc

Dart wins TC and EASA approval for LED pulse lights for Bell 412/etc

9-Feb-2011Source: DART Helicopter Services

DART Helicopter Services is pleased to announce that their affiliated partner, DART Aerospace Ltd., has received Transport Canada and EASA approvals for their Cargo Mirror mounted LED Pulse Lights Bell 204/205/210/212/214/412 model of aircraft. FAA approval is still pending. DART LED Pulse Lights install easily on any DART Dual Cargo Mirror and provide excellent forward... Read more

Dart announces TC approval for Bell 205/212/412 cable cutters

Dart announces TC approval for Bell 205/212/412 cable cutters

30-Aug-2010Source: DART Helicopter Services

DART Helicopter Services is pleased to announce that their subsidiary partner Apical Industries has received Transport Canada approval of their Cable Cutters Kits for the Bell model 204B, 205A, 205A-1, 205B, 212, 214B, 214B-1, 412  and 412EP helicopters.  FAA and EASA approvals have been previously received. Apical’s Cable Cutters Kits provide a means of protecting... Read more

Dart announces EASA approval of Apical’s cable cutters for Bell 204, 205, 212 and 412

Dart announces EASA approval of Apical’s cable cutters for Bell 204, 205, 212 and 412

30-Jul-2010Source: DART Helicopter Services

DART Helicopter Services is pleased to announce that their subsidiary partner Apical Industries has received EASA approval of their Cable Cutters Kits for the Bell model 204B, 205A-1, 212, 214B, 214B-1, 412  and 412EP helicopters.  FAA approval has been previously received and Transport Canada approval is pending. Apical’s Cable Cutters Kits provide a means of... Read more

Dart GPS Receiver Gimbal Mount now compatible with Garmin GPSMAP on Medium Bell aircraft

Dart GPS Receiver Gimbal Mount now compatible with Garmin GPSMAP on Medium Bell aircraft

18-Jun-2010Source: DART Helicopter Services

DART Helicopter Services is pleased to announce that their affiliated partner, DART Aerospace Ltd., has received Transport Canada, FAA and EASA approval for the redesign of their Top Mounted GPS Gimbal Mount for Garmin GPSMAP 296/396/496 for installation on Bell 204/205/212/214/412 aircraft models. DART Aerospace has undertaken to update the design of their centre post... Read more

FAA certifies increased hover performance for Bell UH-1 FastFin

FAA certifies increased hover performance for Bell UH-1 FastFin

27-May-2010Source: BLR Aerospace

Everett, Wash., May 27, 2010 — The Federal Aviation Administration has certified increased hover performance for UH-1H helicopters equipped with the FastFinâ„¢ Tail Rotor Enhancement and Stability System and Lycoming T53-13B engines. FAA certified data shows that operators who install FastFin on their UH-1 helicopters (with Lycoming T53-13B engines) may increase their useful load by... Read more

EASA Approves Dart’s Engine Mount Kit for B204, B205

EASA Approves Dart’s Engine Mount Kit for B204, B205

26-May-2010Source: DART Helicopter Services

DART Helicopter Services is pleased to announce that their affiliated partner, DART Aerospace Ltd., has received EASA approval of their Adjustable Engine Mount Kit for the 204B and 205A-1 series of helicopters.  Transport Canada and FAA approvals have been previously received. The purpose of the Adjustable Engine Mount Kits is to make engine alignment and... Read more

Dart Announces FAA Approval of Apical’s Cable Cutters for Bell 204, 205, 212 and 412

Dart Announces FAA Approval of Apical’s Cable Cutters for Bell 204, 205, 212 and 412

11-May-2010Source: DART Helicopter Services

DART Helicopter Services is pleased to announce that their subsidiary partner Apical Industries has received FAA approval of their Cable Cutters Kits for the Bell models 204B, 205A, 205A-1, 205B, 212, 214B, 214B-1, 412 and 412EP  . Apical’s Cable Cutters Kits provide a means of protecting the helicopter during a wire strike by providing the... Read more

SkyTrac Systems Obtains STC for Eurocopter EC145 and Bell 204/205/210/214

SkyTrac Systems Obtains STC for Eurocopter EC145 and Bell 204/205/210/214

30-Oct-2009Source: SkyTrac Systems

SkyTrac Systems is pleased to announce that it has obtained a supplemental type certificate (STC) for the installation of its automated flight following and satellite communications equipment on the following airframe types: Eurocopter EC 145, Bell 204/205, Bell 210 and Bell 214.... Read more

BLR Aerospace STC Expands Performance Options for Bell 204/205 Operators

BLR Aerospace STC Expands Performance Options for Bell 204/205 Operators

15-Sep-2009Source: RotorNews

BLR Aerospace has good news for owners and operators of Bell 204, 205A, 205A1, and 205B helicopters — especially those whose aircraft are already equipped with Dual Tailboom Strakes. The FastFinâ„¢ segment of the FastFin tail rotor enhancement and stability system has received Supplemental Type Certification from the Federal Aviation Administration for installation on these... Read more

15-Jun-09 C-GAPJ Bell B204 Easterville, Man, Canada

15-Jun-09 C-GAPJ Bell B204 Easterville, Man, Canada

15-Jun-2009

15-Jun-09 C- Bell B204 Easterville, Man, Canada... Read more

Copyright © 2024 HeliHub

Website by Design Inc

Helihub logo

X