EMTEQ has developed a Modulated Rotor Tip Light (MRTL) system as the Phase I preliminary design concept for a U.S. Navy Small Business Innovative Research grant (SBIR).
Position lights for rotary-wing aircraft can be made more visible and effective by using rotor tip mounted lights. Similar to fixed-wing aircraft that use wing tip mounted lights; rotor tip mounted lights add increased lateral separation. By sequentially flashing the appropriate color LED tip light at the appropriate rotor positions of the rotating blade; red, green and white position lighting sector illumination can be achieved. EMTEQ is a leading innovator in aircraft exterior lights supplying over 18,000 aircraft exterior lighting units used on more than 30 rotary and fixed-wing aircraft.
The benefits of MRTL position lighting include greatly enhanced visibility as the tip light path appears to be long stripes of light rather than individual beacons; LED technology offers higher intensity light output in addition to minimal weight and installation footprint; and lateral separation between red and green lights can be as large as the rotor diameter, approximately five times larger than the fuselage width. A MRTL system can also contribute significantly to mission safety by making the rotor tip path highly visible to ground crews and shipboard personnel during taxi, takeoff, and landings and other aircraft during formation flights.
EMTEQ is currently validating design concepts in a dedicated testing facility and is striving for DoD SBIR Phase 2 approval later this year.Â Only those firms that were awarded Phase I contracts are eligible to participate in Phases II and III based on results of the Phase I effort and the scientific, technical, and commercial merit of the Phase II proposal.Â Phase II involves partnering with an OEM to fabricating a full-scale version of the system to demonstrate the applicability of the system. Phase III transitions to a flight-qualified technology that the small business may offer to aircraft manufacturers for incorporation in experimental and/or production aircraft.
About EMTEQ and Its Partners
Incorporated in 1996, EMTEQ offers an extensive selection of innovative, value add products and services for both retrofit and forward fit applications in the air transport, government systems, and corporate markets. Products range from avionics systems installation kits, to interior lighting and CMS, to exterior lighting and structural modification kits. To complement this product offering is EMTEQâ€™s unsurpassed product engineering and design, FAA/EASA/Transport Canada certification and consulting services, and comprehensive program management. Employing more than 400 employees worldwide, offices and manufacturing facilities are located in Miramar, Florida; Winnipeg, Canada; Montreal, Canada; TaubatÃ©, Brazil; BachenbÃ¼lach, Switzerland; and strategic partner Cable Technology Inc. in Great Falls, Montana. EMTEQ complies with EN/JSIQ/AS9100:2004, ISO9001:2008, or EN9100:2003 standards backed with FAA/EASA Part 145 Repair Stations and global technical support. Learn more about EMTEQ and its partners at www.emteq.com.
- 16-Jan-21 517 Bell UH-1H Busdi, Philippines (7F)
- Australia – CASA appoints acting CEO
- Nigerian AF partners with Caverton Helicopters for maintenance
- Container Research Corp wins V-22 aux tank contract
- Naval Supply Systems Command addresses V-22 supply concern
- Australia to replace Tiger with AH-64E
- GAO reports on Washington DC area helicopter noise concerns
- HAI addresses pandemic worries about holding Heli-Expo 2021
- First flight for Airbus H160 for All Nippon Helicopter
- UK AAIB Bulletin – January 2021
- NTSB announces public board meeting on Kobe Bryant S76 accident
- General Electric Aviation awarded $101M contract for support of CH-53K
- Second Nigerian Air Force Mi-171E inducted
- RACQ CQ Rescue publishes 2020 mission stats
- LifeNet Partners with Columbus Community Hospital to Provide Air Medical Services
- US Army requests funding for Rescue Litter Stabilization System
- Bell Certifies New Helicopter Flight Data Monitoring Device
- Bristow appoints Area Manager in Brazil
- Updated Bucher EMS interior approved by EASA on H135
- The Loar Group Announces the Acquisition of Safe Flight Instrument Corporation