25-Sep-2013 Source: Schiebel
Schiebel, FLIR and Transpower are proud to announce the successful demonstration of the Schiebel CAMCOPTER® S-100 Unmanned Air System (UAS) with the integrated FLIR Corona 350 Sensor being used to inspect high voltage power-lines and supporting structures. This event marked the first time that this new capability was demonstrated using a UAS.
Transpower with the support of the New Zealand Civil Aviation Authority hosted a series of demonstrations at the Drury substation in Auckland, New Zealand, where the outstanding combination of the CAMCOPTER® S-100 and the FLIR sensor confirmed the system’s ability to identify encroaching vegetation and activity associated with underbuilding, corrosion and wear and tear damage on power-line conductors as well as ‘hot spots’ in conductors and connection points.
The system also demonstrated the clear benefits of its rapid response time, and the ability to subsequently use the collected information to quickly prioritise and target maintenance, which are particularity important in the rapid rectification of fault events causing line outages.
With a network which comprises some 12,000 kms of transmission lines and 40,000 supporting structures throughout New Zealand and a requirement to regularly assess the condition of these lines and structures to ensure continued safety and integrity of the National Grid. By operating in close proximity to the power lines the S-100 was able to conduct the inspections without infringing existing airspace regulations and clearly demonstrated the value of this new, innovative and cost effective solution for accomplishing airborne power line inspection.
Hans Georg Schiebel, Chairman of the Schiebel Group, commented, “This successful demonstration of the CAMCOPTER® S-100 has clearly shown how it provides a swift, accurate and cost effective capability for reducing the costs associated with conducting power-line inspections and maintenance”.
Founded in 1951, the Vienna-based Schiebel Group of companies focuses on the development, testing and production of state-of-the-art mine detection equipment and the revolutionary CAMCOPTER® S-100 Unmanned Air System (UAS). Schiebel has built an international reputation for producing quality defense and humanitarian products, which are backed by exceptional after-sales service and support. Since 2010 Schiebel offers the new division composite and is able to supply high-tech customers with this high-quality carbon fiber technology. All products are quality-controlled to meet ISO 9001 standards. With headquarters in Vienna (Austria), Schiebel now maintains production facilities in Wiener Neustadt (Austria), and Abu Dhabi (UAE), as well as offices in Washington DC (USA), and Phnom Penh (Cambodia).
About the CAMCOPTER® S-100:
Schiebel’s CAMCOPTER® S-100 Unmanned Air System (UAS) is a proven capability for military and civilian applications. The Vertical Takeoff and Landing (VTOL) UAS needs no prepared area or supporting launch or recovery equipment. It operates in day and night, under adverse weather conditions, with a beyond line-of-sight capability out to 200 km, both on land and at sea. The S-100 navigates via pre-programmed GPS waypoints or is operated with a pilot control unit. Missions are planned and controlled via a simple point-and-click graphical user interface. High definition payload imagery is transmitted to the control station in real time. Using “fly-bywire” technology controlled by a triple-redundant flight computer, the UAV can complete its mission automatically. Its carbon fiber and titanium fuselage provides capacity for a wide range of payload/endurance combinations up to a service ceiling of 18,000 ft. In its standard configuration, the CAMCOPTER® S-100 carries a 75 lbs/34 kg payload up to 10 hours and is powered with AVGas or heavy fuel.