SPAES installs ESI-500 in Airbus Helicopter H125

SPAES installs ESI-500 in Airbus Helicopter H125

14-May-2021

The ESI-500 Standby Instrument System was installed as part of a Garmin G500 TXi installation.

By installation the G500 TXi, the analog devices were able to removed from the instrument panel, which allowed the cockpit to be digitized completely.

Since the G500 TXi provides all flight-relevant data, it was necessary to install a back-up system in order to be able to operate the helicopter safely in case of system failure. The ESI-500 was selected for this purpose, which is also recommended by the manufacturer.

The ESI-500 mirrors the G500 TXi PFD data and displays airspeed, altitude, attitude and slip data.

The unit is equipped with an internal battery and continues to indicate uninterrupted PFD information in the event of a system failure.

The ESI-500 was installed above the Garmin G500 TXi and allows the pilot to give the pilot a good view to the device during operation.

“The installation of the ESI-500 has created the redundancy of the systems and ensured the flight safety of the pilots”, says Melisa Kir, Design Engineer for avionics at SPAES GmbH & Co. KG.

The required minor change for the installation of the ESI-500 in the H125 was carried out in the SPAES’ own EASA Part 21J Organisation.

The ESI-500 was installed in the customer’s own part 145.

For more information, visit www.spaes.de

About the company SPAES GmbH & Co. KG:

SPAES GmbH & Co. KG is a company in the aviation sector. Specialized in air rescue and tactical mission equipment, the portfolio includes products and services, but also the development and certification of equipment, own products and systems as well as their integration and certification in the aircraft. These are certified in accordance with European aviation norms and standards.

As an independent EASA Part 21J Design Organization SPAES offers the execution of Supplemental Type Certificate (STC), Minor Change and Minor Repair for the areas of avionics, cabin, structure, electrical systems, night vision imaging systems and medical equipment.

In our own EASA Part 21G Production Organization we manufacture customer specific and own products as well as installation KITs with EASA Form 1, which are installed in the aircraft by Part 145 companies.

Joachim Schanz, Managing Director SPAES GmbH & Co. KG, founded the company in Mannheim in 2014. In 2019 the headquarters was moved from Mannheim to Karlsruhe.

, , , , , ,

Copyright © 2021 HeliHub

Website by Design Inc

Helihub logo

X